Tomei Japan Oil Pan Sump Baffle Plate Type F2 For Toyota Aristo JZS147 Chaser Cresta Mark II JZX90 JZX100 1JZ 2JZ-GTE

£159.40 £132.83
In Stock
SKU
194008
Fast Shipping
Hassle Free Returns

OIL PAN BAFFLE PLATE for 1JZ/2JZ

OIL LUBRICATION

Photo: Type F1

Protects the engine under the strong G-force on track!

During hard acceleration, deceleration and cornering, the sudden change in inertial forces will cause the oil to jump and move around too much. When this happens, the oil can move away from the oil pickup, which then in turn cuts oil supply to the engine.
The TOMEI baffle plate is designed to prevent this problem from happening especially when the car is used for competition use.

PRODUCT INFO

TYPE APPLICATION P/N   NOTE
TYPE F1 JZS161/JZX110/JZX110W 194005   This product has been designed to fit Toyota
P/N:12102-46040 (OIL PAN NO.2) and P/N: 15104-46070
(STRAINER ASSY) only.
(※This product only fits front sump models.)
TYPE F2 JZS147/JZX100/JZX90 194008   This product has been designed to fit Toyota
P/N:12102-46011 (OIL PAN NO.2) and P/N: 15104-46060
(STRAINER ASSY) only.
(※This product only fits front sump models.)
TYPE R JZA80/JZZ30 194009   This product has been designed to fit Toyota
P/N:12102-46031 (OIL PAN NO.2) and P/N: 15104-46030
(STRAINER ASSY) only.
(※This product only fits Rear sump models.)

 

Make sure the oil pan and oil strainer you are installing this product with are the right application prior to the installation.


FEATURE / SPEC

■ Keeps the oil from sloshing away from the oil pickup during hard cornering.


It allows the one way movement of oil and can keeping it where the oil pickup is at all times by preventing oil deviation with the use of swing plates on hinges.

 

【IMAGE】


■ Competition proven, true performance.


Designed based on the knowledge and experience we acquired in Formula Drift series. It’s well proven in the real competition to increase reliability of the whole engine by helping to properly lubricate the engine at all times.
SPEC
  TYPE F1 TYPE F2 TYPE R
MATERIAL SUS304 SUS304 SUS304
UPPER BAFFLE THICKNESS 1.2mm 1.2mm 1.2mm
LOWER BAFFLE THICKNESS 1.2mm 1.2mm 1.2mm
WEIGHT UPPER : 475g
LOWER : 635g (Including rubber valve)
UPPER : 490g
LOWER : 600g (Including rubber valve)
UPPER : 410g
LOWER : 610g (Including rubber valve)
More Information
Vehicle / Engine Manufacturer Toyota
Product Brand Tomei Japan
Part Type Sumps / Baffles
Manufacturer Toyota
Model Aristo, Chaser, Cresta, Mark II
Variant JZS147, JZX90, JZX100
Engine 1JZGTE Non-VVTi, 1JZGTE VVTi, 2JZGE Non-VVTi, 2JZGE VVTi
Lead Time In Stock
To Top Got any Feedback?