Superforma Custom Manufactured Wheel Spacers For Toyota Yaris GR G16E-GTS 2020+

Hubcentric wheel spacers are designed to make sure the weight of the car is carried by the hub and not by the studs or bolts. They are machined perfectly on the rear of the wheel spacer to match the locating ring on the hub with the same size locating ring on the front of the spacer. This means that the wheels are truly central to the car's hub, meaning no movement and no vibration through the wheels. A hubcentric wheel spacer also results in far less stress on your bolts or studs.

Wheel spacers are ideal for clearing brake callipers/suspension rubbing that can happen when fitting aftermarket wheels, or just to help push your wheels out more to fill the arches and improve the look of your car.

Superforma spacers come ready to bolt on, with all high tensile studs and open-ended nuts or bolts as required.

100% 6082 billet aluminium, used for its weight and strength and milled from one piece of aluminium to ensure the precision of fitment.

Made in the UK

These give the perfect look to the GR Yaris with the factory circuit pack wheels.

Specifications:

PCD: 5 x 114.3
21.5mm to clear factory studs on circuit pack wheels.

Quantity: 1 pair (for a full set please order 2) 

Toyota Yaris GR G16E-GTS 2020+

Please note: all spacers are made to order and will take roughly 10 working days. 

This part is intended as a direct replacement of the standard rubber bush. after 15-20+ years no rubber bush will function as intended. Upgrading to the superforma aluminium steering shaft spacer gives you a much more direct feel of the steering.

Still need more information? Email: [email protected]

This works with all R32 S13 and Z32 models, It will not work with S14's, S15's, R33's and R34's as they do not have a rubber spacer like the earlier models and as such isn't possible to use on these cars.

When used properly and installed correctly, wheel spacers can be safe. However, it is important to note that improper installation or the use of low-quality spacers can lead to serious problems, including wheel detachment and loss of control of the vehicle. It is important to consult with a qualified mechanic and use high-quality spacers that are specifically designed for your vehicle.

The size of the wheel spacer you need will depend on a number of factors, including the make and model of your vehicle, the type of wheel you have, and your specific needs and preferences. It is important to consult with a qualified mechanic or a reputable supplier to determine the appropriate size for your vehicle.

Wheel spacers are typically installed by removing the wheel, placing the spacer over the hub, and then reinstalling the wheel with longer wheel bolts or studs to accommodate the additional width. It is important to follow the manufacturer's instructions and torque specifications to ensure a safe and secure installation.

Yes, installing wheel spacers can affect the performance of your vehicle. Widening the track can improve handling and stability, but it can also increase the stress on the suspension and steering components. Additionally, the use of spacers can change the offset of the wheel, which can affect the appearance and performance of your vehicle.

The legality of wheel spacers varies depending on the jurisdiction. In some places, the use of spacers is legal as long as they meet certain specifications and do not pose a safety hazard. In other places, the use of spacers may be prohibited. It is important to check the laws and regulations in your area before installing wheel spacers.

While wheel spacers can be used on many types of vehicles, it is important to ensure that they are designed for your specific make and model. Using spacers that are not designed for your vehicle can lead to serious problems, including wheel detachment and loss of control of the vehicle. It is important to consult with a qualified mechanic or a reputable supplier to ensure that you are using the correct spacers for your vehicle.

Since 2011 we've specialised in the manufacturing of wheel spacers, pcd adapter kits and aftermarket car parts, we have grown to become one of the UKs largest manufacturer of these products. Over this time we've manufactured products for thousands of road, track and race vehicles, TV and film stunt cars and even military vehicles. No doubt at some point, either in person or on TV, you will have seen our products in action!

With our state of the art machine shop we are able to provide a high quality UK manufactured product. The materials that we use are certified and sourced from UK stockholders. All of our staff are fully CNC trained for each machine we use in our machine shop. We also have a vast knowledge of wheel spacers and vehicle specifications, rest assured if you have a question relating to this then one of our staff members will be more than happy to help.

We also specialise in aftermarket parts for road and performance vehicles, we've undertaken some large product designs, CAD profiles, simulations and also manufacturing of parts. We are always expanding our product range, if there's something you think we should manufactuere then let us know! Keep a check out for new products which will have a 'new' label shown on the photo.