Superforma Nissan Skyline/200SX Solid Diff Bushes

A direct replacement for OEM bushes, a must for race & track use!

These solid diff mount bushes are a direct replacement for the original OEM bushes, they heavily contribute towards the elimination of axle tramp and ensure any movement is kept to a minimum under hard driving conditions.

You may notice a slightly louder transmission noise when fitting these bushes.

They will fit all 2 bolt Skyline and 200SX differentials.

Available as a complete set or front/rear only.

Nissan Silvia S14 200SX
Nissan Silvia S15
Nissan Skyline R33
Nissan Skyline R34
Nissan Laurel C33
Nissan Laurel C34
Nissan Laurel C35
Nissan Fairlady Z32 300ZX

This part is intended as a direct replacement of the standard rubber bush. after 15-20+ years no rubber bush will function as intended. Upgrading to the superforma aluminium steering shaft spacer gives you a much more direct feel of the steering.

Still need more information? Email: [email protected]

This works with all R32 S13 and Z32 models, It will not work with S14's, S15's, R33's and R34's as they do not have a rubber spacer like the earlier models and as such isn't possible to use on these cars.

Roughly about 1 hour to install with the engine in the car, with an engine removed this would be around 10-15 minutes and is not difficult to do for most people. we would always highly reccomend getting a qualified person to install this part if you are unsure.

Since 2011 we've specialised in the manufacturing of wheel spacers, pcd adapter kits and aftermarket car parts, we have grown to become one of the UKs largest manufacturer of these products. Over this time we've manufactured products for thousands of road, track and race vehicles, TV and film stunt cars and even military vehicles. No doubt at some point, either in person or on TV, you will have seen our products in action!

With our state of the art machine shop we are able to provide a high quality UK manufactured product. The materials that we use are certified and sourced from UK stockholders. All of our staff are fully CNC trained for each machine we use in our machine shop. We also have a vast knowledge of wheel spacers and vehicle specifications, rest assured if you have a question relating to this then one of our staff members will be more than happy to help.

We also specialise in aftermarket parts for road and performance vehicles, we've undertaken some large product designs, CAD profiles, simulations and also manufacturing of parts. We are always expanding our product range, if there's something you think we should manufactuere then let us know! Keep a check out for new products which will have a 'new' label shown on the photo.