Radium Bulkhead Harness, External Universal Dual Pump

EXTERNAL ELECTRICAL BULKHEAD CONNECTORS
These bulkheads can be used for rebuilding a damaged connector or for DIY installation.

Metal shell 4-way connector shown above.

Radium no longer carries the external 7-pin mating connector or flying lead harness assembly found on legacy Radium products. However, the connector kit shown in the photo below is still available from electrical component retailers on the internet. Google search using the part number in the photo.

PANEL REQUIREMENTS
All panels must be 0.06-0.18 inches thick. See the drawing below for cutouts for each bulkhead connector. A gasket is included on the large connector and the small connector includes an O-ring for sealing against panel surface.

PINOUTS
If wiring a connector to a Radium Engineering internal harness, the pinouts are below.