Radium Bulkhead Harness, Internal Single Walbro GSS342 Pump

NOTE: Some of these wiring harness connectors are used in Radium Engineering products. For a complete bulkhead mating connection, select one internal and one external harness from the lists above.

INTERNAL AND EXTERNAL BULKHEADS
External harness wires use 24" long 10AWG TXL insulated wires. Internal harness use twin 16 AWG ETFE insulated wires. 

4-Pin metal shell bulkheads and flying lead connectors are available and can be referenced by the part numbers shown in the photo below.


7-Pin Plastic shell bulkhead connectors (shown below) are no longer used in Radium products, but limited quantities of 17-0027 and 17-0028 service parts are still available.
NOTE: If using Walbro "450" style pumps, purchase 17-0028 and cut off the blade terminals then install a compatible mating plug for the Walbro 450 connector. Radium does not have these plugs available, they will bave to be sourced HERE.
Alternatively, after cutting off the blade terminals, the wires can be soldered directly to the wires from the Walbro pump, after cutting off the connector of the walbro pump.

Radium no longer carries the mating flying-lead or connector kit for these 7-pin bulkheads. Refer to the CONXALL part number below for the connector kit.