Orders can be placed as normal, please be aware there may be some delays depending on supplier. Read our COVID19 update.

THE PERFORMANCE PARTS SPECIALIST

01409 231 887

New

Radium Engineering PCV Oil Catch Can Kit For Toyota GT86 / Subaru BRZ (13+)

Be the first to review this product

Availability: 2-3 Weeks

Excl. VAT: £182.42 Incl. VAT: £218.90
Excl. VAT: £182.42 Incl. VAT: £218.90
Become a trader- Apply today
100% Secure Payments

SHARE:


Product Description

Details

An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from aggressive driving. Excess oil-saturated air circulating back into the air intake stream can lead to degraded performance. 

BENEFITS OF A RADIUM CATCH CAN:

-Effectively raises the octane and increased engine performance from cleaner inlet air 
-Prevents oil buildup in the intake or intercooler system walls, throttle body, intake manifold, etc. 
-Excessive oil collection can be an indicator of a damaged engine.
-Lowers hydrocarbon emissions 
-Capacity: 6 fluid ounces 
-Height (without fittings): 5 inches 
-Outside Diameter: 2.45 inches

BRZ / 86 MOUNTING LOCATION
Radium engineers have strategically located the catch cans for compatibility with both Right Hand Drive (RHD) and Left Hand Drive (LHD) "86" model variations. Some brake clearancing is necessary on RHD installations. Both of these kits are also compatible with all current aftermarket forced induction kits. For mounting, the kits use factory bosses and holes in the vehicle. No cutting, drilling or permanent modification to the vehicle is required.

KIT DETAILS
These two oil catch can kits are completely independent of each other and are sold individually or together. They do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed loop systems route clean filtered air back in through the engine to be burned and to promote negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors into the cabin. Each kit includes: 

-Radium billet oil catch can with integrated condenser and dipstick
-Radium laser cut powder coated "86" specific mounting bracket
-Anodized aluminum banjo bolt, -AN hose ends, and adapter fittings
-Enough hose to mate to custom applications  
-Stainless steel mounting hardware
-Installation instructions

The 20-0101 PCV kit mounts on the RH side of the engine bay. This catch can runs inline with the 3/8" PCV (positive crankcase ventilation) valve. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV "check" valve closes and, thus, this hose experiences no flow. Conversely, the PCV hose will experience "metered" vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. Note: Because the Radium catch cans are pressure sealed, they are great for boosted applications as well so connecting to the intake manifold is permitted.

 PETCOCK DRAIN KIT (Sold Seperately) 

-Anodized 4AN ORB barbed fitting 
-Nylon ¼” barb mini ball valve 
-PCV Compliant Rubber Hose

This kit, sold seperately, can be used to remotely drain the catch cans without the need to unscrew the canister body.

Reviews

Write Your Own Review

You're reviewing: Radium Engineering PCV Oil Catch Can Kit For Toyota GT86 / Subaru BRZ (13+)

Product Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.