HFM Big Bore Clutch Slave Cylinder For Nissan Skyline RB25 RB26 (BBCS-RB-AR)

HFM.Parts Big Bore Clutch Slave

A well-rounded upgrade for Skyline RB25 and RB26 (push-type gearbox).

This Clutch Slave will provide you with a lighter feeling pedal when using heavy-duty pressure plates, in comparison to the OEM ¾ Inch Clutch Slave Cylinder.

HFM.Parts have designed this model to include an adjustable steel push-rod to assist with achieving a tailored amount of free-play for the best fit possible which is often hard to achieve when you are using different configurations of aftermarket clutches, pivot ball lengths, thurst bearing carrier lengths etc.

Often, Clutch Slave upgrades can interfere with the Bellhousing causing binding and potentially, damaging your clutch slave. With this in mind, the fitment tabs of the HFM.Parts Clutch Slave Cylinder have been re-engineered to reduce this effect as much as possible.

Includes;

1x Big Bore Clutch Slave Cylinder
*with adjustable push rod.

Applications (Push Type Only):
Nissan Skyline R32 GTR
Nissan Skyline R33 GTS-T
Nissan Skyline R33 GTR

HFM FAQ  

Q. Because the clutch slave body is bigger than the original, will it bind with the bellhousing?
A. We have minimised the risk of binding by re-engineering the fitment tabs, however, due to differences in materials on the bellhousing we recommend performing a fitment test prior to bolting up the clutch slave. If there is a chance that the clutch slave body will touch the bellhousing ribs we recommend linishing this area slightly.

Q. What size is the bore size of this product?
A. The HFM.Parts Big Bore Clutch Slave has a bore size of 13/16.

Q. What is the benefit of having an adjustable push rod?
A. An adjustable push rod allows you to fine-tune your push rod to clutch fork free play so that you don’t have any clutch fork overriding.