Ike Engineering Plenums - RB25/RB26

Ike Engineering Plenums - RB25/RB26

Description

Nissan Skyline R33 GTS-T Inlet Manifold to suit the RB25DET engine.

This manifold fits to the factory lower std section so no additional fuel rail or injectors are required. It accepts the std Nissan throttle body or can be modified for the 80mm or 90mm Throttle Bodies. Cast in two sections 5mm thick and tig welded together. This will easily cope with 2bar of boost without failure. Accepts all the standard fitting hardware and vacuum pipe work etc. Comes mirror polished as standard. Substantial performance gains are available using this over the standard manifold.

Nissan Skyline GTR32 33 or 34 cast intake manifold and plenum with80mm throttle body.

Internally it has full radius trumpets. The plenum cover is polished and has take off ports with fittings supplied for vacuum / pressure take offs. This will accept the standard top feed style injectors and fuel rail. All other standard part are a direct fit. The throttle body comes with weld on plate in order to suit your specific length / angle requirements. It will accept the standard tps and has throttle quadrant fitted. Butterfly runs on stainless steel shaft with twin sealed roller bearings. This is a major performance enhancement over the standard manifold and throttle bodys.